VIDEO VIEWER MISCELLANEOUS CONTROL PANEL
-13-
5. VIDEO VIEWER MISCELLANEOUS CONTROL PANEL
Click “ ” (Miscellaneous Control) on the Video Viewer control panel, and 7 functions are available as follows:
Click the button to show the current version of the video viewer.
NO.
Button Function Description
/
Audio On / Off
Click this button to turn on / off the audio function of the network camera.
j
Audio Volume Control
To adjust the volume of the audio, press and drag the volume slider.
k
Color Setting
Click this button to adjust the brightness / contrast / hue / saturation for the
selected network camera. For details, please see “5.1 Color Setting” at
page 14.
l
Backup
(For DVR only)
The network cameras don’t support network backup function. This function
is available when the Video Viewer is connected to a DVR. You can log into
the connected DVR via this software and remotely backup the video data
saved in the DVR. For details, please see “5.2 Backup” at page 14.
m
Record Setting
Click this button to go to the detailed record setting. For details, please refer
to “5.3 Record Setting” at page 15 for details.
n
Server Setting
Click this button to go into the detailed server setting. For details, please
refer to “5.4 Server Setting” at page 15 for details.
o
Tools
Click this button to update the firmware version of your network camera. For
details, please refer to “5.5 Tools” at page 31 for details.
p
Status List
Click this button to view all the record list and login/logout event list, search
the desired log list(s) by date, or playback the recording of the selected log
list. For details, please refer to “5.6 Status List” at page 33 .
To Next Page
Loading...
