-21-
Function Description
PPPOE
PPPOE stands for Point-to-Point Protocol over Ethernet. Users can easily have the Internet service as long as
they’re ready for the following things: 1) Insert an Ethernet card into the PC. 2) Obtain the ADSL service via any
ISP. 3) Obtain and install the PPPOE software CD.
When everything is ready, choose the “PPPOE” IP type, and key in the user name and password provided by your
ISP. Then, select “Network” → “DDNS” to set DDNS settings.
For detailed DDNS settings, please refer to
“DDNS” section.
DHCP
This DHCP function needs to be supported by a router or cable modem network with the DHCP service. Choose
the “DHCP” IP type, and select “Network” → “DDNS” to set DDNS settings.
For detailed DDNS settings, please refer to
“DDNS” section.
DDNS
You need to apply a DDNS account before setting PPPOE or DHCP connection. DDNS is a service for
transforming the dynamic IP corresponding to a specific “host name”. Go to a website which provide free DDNS
services and apply a host name.
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Network” → “DDNS” to enter.
u DDNS Apply:
You need to apply a DDNS account before setting PPPoE or DHCP connection. DDNS is a service for transforming
the dynamic IP corresponding to a specific “Hostname”. Please refer to the steps below.
‧ Go to a website which provides free DDNS services and apply a “Hostname”.
For example, go to http://www.dyndns.com.
‧ Enter all the information necessary for signing up an account according to the website instructions.
To Next Page
Loading...
Need help?
General
