-30-
Tracking
Click “ ” (Miscellaneous Control) → “ ” (Server Setting) → “Camera” → “Tracking” to go into the
“Tracking” page and access the following functions. In this page, you can setup the auto tracking function. When
the locked target is out of the pre-defined surveillance area, the camera returns to the point it originally monitors
after the preset tracking timeout.
u Set the pre-defined surveillance area (Limit 1 & Limit 2) and Tracking Timeout (Range or Infinite):
Function Description
Limit 1 When the locked target stops moving longer than the pre-defined tracking timeout, the camera
returns to the point it originally monitors after the preset tracking timeout.
To Next Page
Loading...
