-28-
Function Description
Add Specify the camera position (pan and tilt) and the lens zoom setting in the live view of the video
viewer. Then press “Add” button to assign the preset name of the preset point. After setup, press
“OK” to confirm the setting.
Insert Specify the camera position (pan and tilt) and the lens zoom setting in the live view of the video
viewer. Then press “Insert” button to assign the preset name of the preset point. After setup, press
“OK” to confirm the setting.
Delete Press “Delete” button to delete the selected preset point.
Edit Select the preset point and press “Edit” button to modify the camera position (pan and tilt), the
lens zoom setting and the preset name. After modification, press “OK” to confirm the setting.
Example for the preset point operation:
There three customized preset points. In the PTZ control panel, press No. 2 preset point and the PTZ network
camera will go the pre-defined location of the No. 2 preset point immediately.
To Next Page
Loading...
Need help?
General
