Port VLAN: Determine the VLAN ID (also known as PVID) of the port. The allowable
VLAN range is 1 to 4095, and the default is 1.
Voice VLAN configuration’s screen as blew:
Enable Voice VLAN, the Access port will carry the IP voice traffic from the IP phone.
When the switch is connected to Cisco IP phone (such as Cisco 7960 IP phone), the
voice traffic sent by IP phone has three layers of IP priority and two layers of CoS
value, which are set to 5 by default. For IEEE 802.1Q or IEEE 802.1p tagged traffic, the
default cos value is untrusted.
Configure VLAN based on MAC address, screen as blew:
Configure VLAN based on IP, screen as blew:
To Next Page
Loading...
