Verbindungen
Connection instruction
1) Connect HDMI input to HDMI source device via HDMI cable.
2) Connect HDMI output to HDMI display device via HDMI cable.
3) Power on the device (power led lights) and it works.
Note
1) When the wireless signal transmits through wall, glass or other obstacles,
it will cause signal loss. Please install this device in good environment with
few obstacles.
2) The external environment wireless signal will affect transmission, such as
micro waver, wireless mouse and keyboard etc.
HDMI Extender Sender (TX)
HDMI-Extender-
Empfänger (RX)
HDMI Extender
Receiver (RX)
To Next Page
Loading...
Need help?
General
