3.3 AP Direct mode (special)
1) Power up the camera and hear the voice "Please
configure camera by scanning code or AP hotspot" (if
you don't hear the voice, reset the camera.
2) Open the YCC365 plus app to enter the login interface,
click “Local login”.
3) Make your phone connect to “CLOUDCAM_XXXX”
network ”.
4) Click “AP networked device preview” and Click “Next”.
5) Scanning the device in the Wi-Fi network, then click
the device.
6) Enter user name: admin password: 12345, click
“CONFIRM”, then you can preview the screen.
To Next Page
Loading...
Need help?
General
