- 17 -
13. Handling
For all handling, do not forget:
To raise the input guides
To close and lock the roll-forming banks
A. Wheels
The profiling machine is equipped with wheels
Use them for short distances, on flat surfaces.
B. Transport
It is possible to handle the machine with a forklift or with straps.
When using the lifting eyes, you must check that they are tight.
C. Vertical storage
The Dipro P4600 is designed to be stored vertically, to stop it taking up too much space in a truck or
workshop.
You must strap the machine when being transported.
To Next Page
Loading...