dimos DIPRO-P4600 - 2 General Characteristics

6
2. GENERAL CHARACTERISTICS
Dipro 4600
- Length overall (transport)
0,9 m
- Length overall (use)
1,2 m
- Width
1,23 m
- Height
0,73 m
- Weight
160 kg
- Motor power
0.75 kW
- Voltage
220V mono (or 110V)
- Profiling speed
10 m / min.
- Noise emitted less than
75 dB
Capabilities
By default, the DIPRO-4600 profiling machine is factory set for thicknesses from 0.4 mm to 0.8mm.
Steel 400 N/mm
2
Up to 0,70 mm
Aluminium A5 1/2 hard H24
Up to 0,80 mm
Copper 1/4 hard
Up to 0,80 mm
Stainless steel 470 N/mm
2
Up to 0,50 mm*
Zinc
Up to 0,80 mm
Mini length
800 mm
Profiling with 1 pass min width
235 mm
Profiling with 1 pass min width
700 mm
Profiling with 2 pass min width
130 mm
Profiling with 2 pass min width
650 mm
Please check the electrical supply is reliable and constant. Read the instructions guide before use.
Read the general safety recommendations carefully.
The maximum thickness of the sheets must not exceed 0.80 mm. Never use this machine for profiling sheet
metal that exceeds the maximum profiling capabilities.
EN
G