Dimplex ASCARI MA12 - Regulation settings

Ascari MA12 -p. 32 -
For fitter's use only.
The regulation must be adjusted according the use of the boiler.
• Press
and (3 sec) to start setting menu for 4 minutes.
• Parameter #
starts blinking in front of "°C"
• Press
or (instant touch) to select next parameter, i.e °C, ... until °C
• To start setting the displayed parameter press
or (instant touch).
• The parameter value, i.e
starts blinking in front of "bar".
• Press
or (instant touch) to change setting.
• Press
or (instant touch) to confirm setting and return to setting menu.
• Press
and (3 sec) any time to exit the setting menu.
2.21 - Regulation settings