6
TO REPLACE FILTER (FIGURE 9)
1. Remove the 2 mounting screws from the air fi lter bracket.
2. Slide forward to remove the air fi lter bracket assembly from the fi rebox.
3. Slide fi lter out of air fi lter bracket.
4. Reassemble in reverse order as above.
NOTE
If after market air fi lter is used ensure it is installed according to the manufacturers recommended
instructions.
FIGURE 9
Purifi re Filter
Filter Bracket
Mounting
Screws
MIRROR CLEANING
The mirror is cleaned in the factory during the assembly operation. During shipment, installation,
handling, etc., the mirror surface may collect dust particles; these can be removed by buffi ng lightly with a
clean dry cloth.
To remove fi ngerprints or other marks, the mirror can be cleaned with a damp cloth using good quality
household glass cleaner. The mirror should be completely dried with a lint free cloth to prevent water
spots. To prevent scratching, do not use abrasive cleaners or spray liquids on the clear door surface.
ACCESSORIES
Please contact your local dealer for genuine Dimplex accessories. Example: glass door kits, brass and
stainless steel trims, and cabinets designed to fi t your fi replace.
To Next Page
Loading...
Need help?
General
