How to fix a Dimplex Indoor Fireplace that trips the circuit breaker?
If the circuit breaker trips or the fuse blows when you turn on your Dimplex Indoor Fireplace, it might be due to the circuit's current rating being exceeded by multiple appliances. To resolve this, try plugging the unit into a different outlet. Alternatively, install the unit on a dedicated 15 amp circuit.
Why do lights dim when Dimplex Indoor Fireplace is on?
If the lights in the room dim when your Dimplex Indoor Fireplace is on, it's likely that the unit is drawing close to the circuit's current rating. To fix this, try moving the unit to another outlet. If that doesn't work, consider installing the unit on a dedicated 15 amp circuit.
What to do if Dimplex BF5000NT Indoor Fireplace does not turn on?
If your Dimplex Indoor Fireplace doesn't turn on, there might be several reasons. It could be due to improper operation, so you should refer to the User’s Guide. Other potential causes include a defective main on/off switch (which would need replacing), a defective remote control (try installing a new battery), or loose wiring (check the wiring connections).
Why does the power cord of my Dimplex BF5000NT Indoor Fireplace get warm?
If the power cord of your Dimplex Indoor Fireplace gets warm, it could be due to normal operation when the heater is on. The power cord may get slightly warm to the touch. However, it could also indicate a defective power cord, in which case you should replace it.
Why is the heater not turning on in my Dimplex Indoor Fireplace?
If the heater on your Dimplex Indoor Fireplace isn’t turning on, it could be due to a defective heater on/off switch, which would need to be replaced. It could also be a defective heater assembly, which would also need replacing. Improper operation could also be the reason, so refer to the User’s Guide. Finally, check for loose wiring in the unit.
Why does my Dimplex BF5000NT heater emit an odor?
A Dimplex Indoor Fireplace heater may emit an odor for a brief period after it's initially turned on. This is normal operation, and the heater is burning off any dust accumulated during manufacturing or operation. However, if the odor persists, it could indicate a defective heater assembly (replace it) or loose wiring (trace wiring in unit).
Why does my Dimplex Indoor Fireplace turn on and off by itself?
If your Dimplex Indoor Fireplace turns on or off by itself, it might be because the remote control has a similar frequency to other remotes in the area. In this case, replace the hand held remote control. It also can be caused by radio frequency disturbance from outside sources.
What to do if the heater is not turning off on Dimplex BF5000NT Indoor Fireplace?
If the heater on your Dimplex Indoor Fireplace isn’t turning off, it could be due to a defective heater on/off switch, which would need replacing. Improper operation could also be the issue, so see the User’s Guide. Finally, check for loose wiring in the unit.
Is it normal for the heating element to glow red in Dimplex Indoor Fireplace?
Small glowing sections of the heating element in your Dimplex Indoor Fireplace are considered normal. However, if larger glowing sections are causing the heater to trip the thermal cut out, unplug the unit, discontinue use, and replace the heater assembly.
Why does the heater fan turn on but heater lacks heat in Dimplex BF5000NT Indoor Fireplace?
If the heater fan in your Dimplex Indoor Fireplace turns on but doesn't produce heat, it could be due to improper operation, so refer to the User’s Guide. Other potential causes include a defective thermostat (replace it), loose wiring (trace wiring in unit), or a defective heater assembly (replace it).
General| Model | BF5000NT |
|---|---|
| Type | Electric Fireplace |
| Fuel Type | Electric |
| Heating Capacity | 5000 BTU |
| Voltage | 120V |
| Wattage | 1500W |
| Heater | Yes |
| Remote Control | Yes |
| Flame Technology | LED |
| Adjustable Thermostat | Yes |
| Finish | Black |
To Next Page
