Dimplex Evolve 50 - Operation; General Operation; Hidden Touch Controls; Remote Operation

18 www.dimplex.com
General Operation
WARNING: This electric rebox must be properly installed before it is used.
This rebox operates with Comfort$aver
TM
technology, which automatically adjusts the fan speed and heater wattage
to safely and precisely match the requirements of the room based on the thermostat setting. The heater operates
such that once the room reaches the set point, the fan and heater will continuously run at a low level, to maintain the
desired room temperature. If the temperature in the room rises signicantly, the heater will turn off and periodically
turn back on to circulate the air around the unit, until the room temperature drops and requires the heater to be
on again.
!
NOTE: The element retains heat after shutdown. When the heat is turned off, there is a 2-minute cool down period
before the fan shuts off completely.
!
NOTE: The replace will retain the previously used settings after a power interruption.
Hidden Touch Controls
The hidden touch controls are located on the upper right of the replace. (Figure19)
Remote Operation
The replace is supplied with a multifunction IR remote control. (Figure20)
!
NOTE: To operate correctly, the remote control must be pointed toward the front of the unit.
App
The replace is capable of being controlled using the Flame Connect app for mobile devices. For up-to-date
information about the app, please visit www.dimplex.com/fcapp
Figure 19
Figure 20
Operation