Dimplex Free-E - RF Channel Selection; Update Firmware

To Next Page

To Previous Page

Millbrook House, Grange Drive, Hedge End, Southampton SO30 2DF

0844 879 3587

dimplex.co.uk | gdcgroup.co.uk

Dimplex

4.3.5 RF Channel Selection

The default RF channel is Channel 1 and will generally not need to be changed. If you experience interference,

however, you can change this channel between channels 1-4 until the reception is clearer.

4.3.6 Updating Firmware

You can check for ﬁrmware updates by selecting the Update Firmware option in the Advanced Settings menu.

Once this option is selected, the software will check for updates automatically. If a new ﬁrmware update is

available, the screen display will conﬁrm this and the ﬁrmware update will begin automatically.

Channel 2

Channel 3

Channel 4

Channel 1

RF Channel Selection

Update Firmware

Step:9

Version:5

Checksum: 13665325

File size: 176556

Downloading Firmware:

63488/176556

Other manuals for Dimplex Free-E