21
Inspection & Cleaning
1.
cleaning may be necessary for mild weather even though monthly cleaning may be enough in the
coldest months.
2. Ensure that the door seals are in good condition. If they are worn, replace the door seals.
3. Inspect and clean the glass regularly in order to detect any cracks. If a crack is present, allow the
4.
to use a cleaner that contains caustic or abrasive ingredients. Do not clean with alcohol based
cleaners. The glass should be washed only when the stove is cold to facilitate good operational
practices.
5. Do not abuse the glass door by striking or slamming shut. Do not use the stove if the glass is
broken. If the glass breaks, replace only with the same 5 mm (0.2") ceramic glass supplied from
your dealer. Never substitute other materials for the glass.
6. The outside panels of the appliance can be cleaned with a dry cloth or soft rag. Do not dampen.
Household detergents and abrasive cleaners may damage the paint on the panels or emit bad
7. Over the years, the black paint will fade and can be touched up with high heat resistant metallic
8. Depending on quality of maintenance, there may be signs of rust (corrosion) on the body of the
Ash Removal
Depending on the type of wood burnt and frequency, the ashes will need removing every
2 to 6 weeks.
Excess ashes should be removed when necessary. Make sure the stove is completely cold before
you remove the ashes. Remove the log retainer grill in order to remove the ash with ease.
soil or otherwise locally dispersed, they should be retained in the closed container until all embers
have thoroughly cooled.
Maintenance
To Next Page
Loading...
Need help?
General
