To Next PageTo Next PageHow to fix Dimplex Indoor Fireplace that will not turn on?
If your Dimplex Indoor Fireplace unit isn't turning on, first ensure it's properly plugged directly into a functioning electrical outlet with confirmed power. If it's plugged in but still not powering on, the main control board or the touch pad might be defective, requiring replacement.
Why does my Dimplex SIL48 heater shut off on its own?
If the heater in your Dimplex Indoor Fireplace shuts off unexpectedly and the cutout is engaged, it might be due to dirt and debris obstructing proper function. Try cleaning the air vents and heater assembly using compressed air. If the issue persists, the heater assembly itself may be defective and require replacement.
What to do if Dimplex SIL48 remote is not working?
If the remote for your Dimplex Indoor Fireplace isn't working, begin by replacing the batteries. If new batteries don't solve the problem, the remote control itself may be defective and need replacement. Also, a defective IR sensor may be the reason, in that case replace the touch pad.
Why is the heater not turning on and ember bed flashing on my Dimplex SIL48 Indoor Fireplace?
If the heater on your Dimplex Indoor Fireplace is not turning on and the ember bed is flashing, it's possible that the heat function is deactivated. To reactivate it, press and hold the Heat button for 10 seconds while the unit is on until the heat turns on.
What to do if my Dimplex Indoor Fireplace shows error E3?
If your Dimplex Indoor Fireplace displays the error code E3, it indicates that the vents may be dirty or clogged. To resolve this, unplug the power, carefully clean any dust and debris from the vent area. After cleaning, wait for 5 minutes, then plug the unit back in and turn on the heater. If the heater still doesn't work after these steps, please call technical support.
What to do if my Dimplex Indoor Fireplace displays error E1?
If your Dimplex Indoor Fireplace is showing error code E1, this indicates that the heater is overheating. In this case, you should call technical support for assistance.
What does error E2 mean on my Dimplex Indoor Fireplace?
If your Dimplex Indoor Fireplace displays the error code E2, it means the thermistor is defective. You should call technical support for assistance.
What to do if Dimplex Indoor Fireplace shows error E3?
If your Dimplex Indoor Fireplace displays error code E3, it indicates that the vents may be dirty or clogged. To resolve this, unplug the power, carefully clean any dust and debris from the vent area. After cleaning, wait for 5 minutes before plugging the unit back in and turning on the heater. If the error persists after these steps, further assistance is needed.
Why does my Dimplex Indoor Fireplace show error E1?
Error code E1 on your Dimplex Indoor Fireplace indicates that the heater is overheating.
General| Model | SIL48 |
|---|---|
| Type | Electric Fireplace |
| Flame Effect | LED |
| Remote Control | Yes |
| Thermostat | Yes |
| Timer | Yes |
| Heat Output | 1500 Watts |
| Voltage | 120 Volts |
| Weight | 25 kg |
| Installation | Wall-Mounted |
| Style | Wall-Mounted |
