parking brake active indicator light;
work lights active indicator light;
engine oil level low indicator light;
differential block active indicator light;
front axle block active indicator light;
cooling fan inversion active indicator
light;
movement speed selection indicator
light: slow/fast;
controls position indicator light;
ground/basket.
The central band shows:
the motor rev counter to the LH,
the number of working hours in the
centre, the batteries voltage, the fuel
level and the code of the faulty of the
engine;
The engine oil pressure indicator and
the engine water temperature
indicator on the RH.
The bottom band shows the indications of
the pages that can be consulted:
engine data (rpm, drive torque
percentage measured, coolant
temperature, oil pressure, engine
consumption measured, instant and
maximum fuel consumption,
operating hours, quantity of fuel used,
required engine speed);
operational data (angular inclination
of boom, angular inclination of
secondary boom, angular inclination
of JIB, inclination of the platform,
inclination of the truck on the
horizontal plane, hydraulic fluid
temperature, load measured on
platform);
options settings
(activation/deactivation of basket
safety system, cooling fan inversion
activation/deactivation, transport
mode activation/deactivation; engine
compartment hood micro switch
activation/deactivation; telescopic
boom closure confirmation
activation/deactivation.
The setting interface could be entered by
depressing setting button and hold on for
one second. The optional function can be
turned on or off without password, after
entering setting interface. The procedures
are as follows:
A Depressing or
is used to choose the item
separately. For example “P61
Anti_Pinch On Cage”, “F509 Cooling
Fan Reverse”, “F510 Transport Mode
Enable” and “F541Engine Hook
Open Enable”. The chosen item
would be shown in yellow
background.
To Next Page
Loading...
