DINGLI BT30RT - Page 51

Operating Instructions
47
Class B
Item
Fault
Restriction logic
1
moving joystick fault
1 restrict moving, showing code 46
2 moving joystick initialization fault after restarting up
system, restrict moving and show code 36
2
main boom telescopic
joystick fault
1 restrict main boom telescopic operation, showing
corresponding faulty code.
2 telescopic joystick initialization fault after restarting
up system, restrict telescopic and show code 36
3
main boom lifting joystick
fault
1 restrict main boom lifting operation, showing
corresponding faulty code.
2 lifting joystick initialization fault after restarting up
system, restrict lifting and show code 36
4
jib lifting joystick fault
1 restrict jib lifting operation, showing corresponding
faulty code.
2 jib lifting joystick initialization fault after restarting up
system, restrict jib lifting and show code 36
5
turret rotation joystick fault
1 restrict turret rotation, showing corresponding faulty
code.
2 turret rotation joystick initialization fault after
restarting up system, restrict turret rotation and show
code 36
Class C
Item
Fault
Restriction logic
1
PVG fault
1 No restriction.
2 Show corresponding faulty code.
2
jib retraction limiting fault
(only for
BT30RT/BT26SRT)
1 Show code 91 when moving.
2 High speed mode cannot be chosen.
3
chains broken switch
1 Restrict main boom extending out, showing code 51
4
engine fault
1 No restriction for operation system
2 Show corresponding faulty code.
Lower the platform by activating bypass button on ground console or platform console, and then
operating corresponding operation, when there is one fault or more belonging to class B or class
C.