E-3 Differentials oil - Change
1 Place suitable sized containers under the
axle. Remove the three drainage caps of
the differential 3. 2. Wait for the oil to drain
out completely. To speed up the operation,
remove filler cap 2.
2 Refit caps 3 and tighten adequately.
Remove level cap 1.
3 Pour fresh oil of the correct type through
hole 2. Fill in stages and check the flow of
oil through level hole 1.
4 When the correct level is reached, refit
level cap 1 and filler cap 2.
E-4 Wheel reduction gears oil -
Change
1 Place a suitable sized container under the
reduction gear. Turn the reduction gear
cap in position 1.
2 Remove the cap and wait for the oil to
drain out completely.
3 Turn the reduction gear cap in position 2.
Fill oil through the hole to the correct level.
4 Refit the cap. Repeat this operation for
each wheel.
To Next Page
Loading...
