DINGLI S03-E - Specifications

OPERATOR’S MANUAL with Maintenance Information
Specifications
30
S03-E Specification
Height, working maximum
5 m
Height, platform maximum
3 m
Height, stowed maximum
1.85 m
Width
0.76 m
Length
1.15 m
Length with one extension deck, platform extended
1.95 m
Maximum load capacity
240 kg (1 person + 160kg tools & materials)
Maximum wind speed
12.5m/s with retracted extension decks & maximum 150kg(1person)
Wheelbase
0.92 m
Turning radius (outside)
2.5 m
Ground clearance
5.5 cm
Weight
510kg /560kg (S.E.P.) / 578kg (D.E.P.)
Rated Slope
Level Surface
Maximum working slope
2°
Gradeability
25%
Maximum hydraulic Pressure
110 bar
Tire size
6” Caster φ230 x 80
Platform length
1.15 m
Platform extension length
0.7 m
Platform width
0.6 m
Stowed, maximum drive speeds
4 km/h
Platform raised, maximum drive speeds
0.8 km/h
Airborne noise emissions
70 dB
Maximum sound level at normal operating workstations (A-weighted)
Floor loading information
Tire load, maximum
500 kg
Tire contact Pressure
7.8 kg/cm
2
/ 8.6kg/m
2
(S.E.P.) / 8.8kg/m
2
(D.E.P.)
Occupied floor Pressure
858 kg/m
2
/ 915kg/m
2
(S.E.P.) / 936kg/m
2
(D.E.P.)
Note: Floor loading information is approximate and does not incorporate different option configurations.
It should be used only with adequate safety factors.
Continuous improvement of our products is a DINGLI policy. Product specifications are subject to change without
notice or obligation.