Dingtek DF702 - 5.3.3 Sending Configuration Commands

Beijing Dingtek Technology Corp., Ltd. Tel:86-10-64718863, 64753700
http://www.dingtek.com E-mail: service@dingtek.com
Room A209, Flounder Business Park, Shunbai Road 12, Chaoyang District, Beijing, China 100022 Page
13
Figure5.8
3 when you send as related commandos of configuration and related parameters to the
serial software, such as devaddr, nwkskey, etc. (please refer to the specific instruction format
LoRa instruction manual).
Sending First Command
send input command:AT+ID, (read all) as shown in figure5.8.
Response of Device
+ID: DevAddr, 01:7D:53:74
+ID: DevEui, 47:68:B2:69:00:2A:00:43
+ID: AppEui, 52:69:73:69:6E:67:48:46
Sending Second Command
AT+KEY=NWKSKEY,"6132f00ad1efd2d4af5e12f8ef745d8b" (set nwkskey),as shown in
figure5.9.
Response of Device
+KEY: NWKSKEY 6132F00AD1EFD2D4AF5E12F8EF745D8B
As shown below: