Diono Rainier - Rear-Facing Installation; Detachable Base Installation

Rear-Facing Installation
30
Retaining
hooks
Detachable Base (Rear-facing)
WARNING:
• Detachable base must be used only when the car seat is rear-facing.
• Do NOT use detachable base when the car seat is forward-facing.
• Do NOT use pool noodles or rolled towel in lieu of detachable base,
or to adjust the rear-facing angle of the seat.
Installing base (rear-facing only)
Removing Base
Pull metal tab out to unlock
base.
Slide base forward (the opposite
direction as shown in picture).
Pull base away from the bottom
of the car seat.
Confirm car sear is locked in its
unfolded position.
Confirm adjustable bottom is
flush with the bottom of the car
seat.
Align posts with holes and insert
base into the bottom of the car
seat.
Slide base back until it reaches
alignment mark on the bottom of
the car seat and secures into place.
Push in the metal tab to lock
base.