Forward-Facing Installation
42
Push down on the car seat
(where the child sits), while
tightening the SuperLATCH™
strap. To check for a tight fit, grab
the seat near the label that states
“forward-facing belt path” with
one hand and give it a moderate
tug. It should move less than 1
inch side-to- side, back-to-front.
Remove slack from Top Tether strap if an appropriate anchor
is available (See page 47 for Top Tether installation).
Forward-facing SuperLATCH™
Installation (cont.)
❒ See final checklist on page 50
To Next Page
Loading...
