Before You Start
5
Get to Know Your Car Seat (cont.)
Upon removing your car seat from the box,
unfold your seat.
(See pages 7-9)
• Check to be sure the area is clear of debris.
• Remove body support and infant head support
cushions.
• Check that your seat is in the unfolded and locked
position.
Get to know the parts, pieces, and accessories
of your car seat.
(See pages 12-13)
Seat Position
Determine the seating position of your child.
(See pages 10-11)
• Will your child be rear-facing or forward-facing?
Determine how you will be installing your seat.
(See pages 10-11)
• LATCH or seat belt installation
• Top Tether
• Booster Mode without harness
• Safe Stop® (Please Note: Do not discard Safe Stop®
as you may need this piece later during your child’s
development)
Harness Position
Be familiar with the steps to properly secure
your child in your car seat.
(See pages 21-29)
• Proper harness height and maximum child weights.
• Harness buckle location and installation.
• Side impact and head support
• Infant support cushions
To Next Page
Loading...
