Additional Information
58
Aircraft Installation
Important: This seat is certified by the Federal Aviation
Administration (FAA) for use ONLY as a harnessed restraint.
This restraint is NOT certified for use in an aircraft as a belt-
positioning booster. Call airline to confirm the car seat will fit
your specific aircraft. Diono’s Angle Adjuster (sold separately)
may be beneficial. Seat belt extender will be necessary for
rear-facing installation.
For a step-by-step airplane installation, watch
our video here: www.youtube.com/DionoUSA
Rear-facing aircraft
installation (Figure 1)
• Adjust seat belt buckle to its
shortest length to ensure
buckle is accessible for release.
• Ask flight attendant for ‘seat
belt extender,’ and then use this
extender to adjust seat belt
length.
• Follow remaining installation
instructions on page 35.
Forward-facing aircraft
installation (Figure 2)
• Follow installation instructions
on page 45. Do NOT use top
tether for aircraft installation.
To Next Page
Loading...
