8
©
2000 Directed Electronics, Inc.
The LED will remain lit when the unit is in Valet Mode and the igni-
tion is off. As a power-saving feature, the LED will turn off after 60
minutes and will come back on each time the ignition is cycled.
When the ignition is on, the LED will automatically turn off.
Operation as an
ESP Interface
When using the 103T as a serial interface for a DEI ESP security
system, the 103T keypad can be used to control the ESP system’s
basic functions, such as panic, Valet Mode and emergency override.
In this mode, the LED on the keypad functions as the main system
LED, and the keypad’s trigger sequence and the passive arming are
disabled.
Please refer to your ESP system owner’s guide for detailed descrip-
tions of the following functions that can be controlled by the 103T
keypad.
When disarming your ESP system, the ignition may be turned on or
off. To disarm the ESP system:
1. Enter your personalized PIN code.
2. Press . The system is now disarmed.
Disarming the ESP System
To Next Page
Loading...
Need help?
General
