3
©
2000 Directed Electronics, Inc.
Important Information
The 103T Digital Failsafe Starter Kill is designed to be used as
either a stand-alone passive/active starter kill or as an interface to
DEI’s ESP systems that use 3-pin data ports. The 103T features an
illuminated dash-mounted keypad, code-protected emergency
override, and Valet® code protection.
When used as a stand-alone starter kill, the 103T prevents the
starter from cranking whenever the system is armed. You can con-
trol the 103T’s basic functions from the dash-mounted keypad.
Simply enter coded key sequences to control the starter kill func-
tions.
The 103T can also be used as a serial controller for any of DEI’s ESP
systems. The ESP system LED can be plugged into the 103T’s key-
pad port, so that the LED on the keypad functions as the main sys-
tem LED. When connected to an ESP system, the 103T can be used
to control such features as Panic, Valet Mode and emergency over-
ride.
Product Description
To Next Page
Loading...
Need help?
General
