4
©
2000 Directed Electronics, Inc.
System Features
Pressing any button will illuminate the keypad. The illumination
will time out 5 seconds after the last key is pressed.
A personalized PIN code must be established to operate the
various functions of the 103T. A PIN code can range from 1 to 10
digits. Any digit may be repeated. The default PIN code from the
factory is 1234.
To program a new, personalized PIN code:
1. Make sure the system is disarmed or in Valet Mode.
2. Turn on the ignition.
3. Enter the existing PIN code and the press . The LED will
flash once. EXAMPLE: To enter the factory default PIN code of
1234:
■ Press for 1.
■ Press for 2.
■ Press for 3.
■ Press for 4.
■ Press to enter the code.
PIN Code Security
Keypad Illumination
To Next Page
Loading...
Need help?
General
