55
©
2004 Directed Electronics, Inc.
RR ee mm oo tt ee FFuunnccttiioonnss
This system is programmable, making it possible to assign any
remote button to any specific receiver function. The remote initial-
ly comes programmed with Standard Configuration, but may also be
customized by an authorized dealer. The buttons in all of the instruc-
tions in this manual correspond to a Standard Configuration remote.
BBuuttttoonn
The arm/disarm/panic functions are usually controlled by .
BBuuttttoonn
An optional accessory function (such as trunk release), remote-
controlled silent arm/disarm, and remote-controlled Valet
®
are
usually controlled by . (Silent arm/disarm and remote-
controlled Valet® work by pressing for less than one second.
An optional accessory can be controlled by pressing and holding
for 1.5 seconds.)
This accessory output controls ____________________________.
aanndd BBuuttttoonnss
Press these two buttons simultaneously to activate another option-
al accessory.
This accessory output controls ____________________________.
To Next Page
Loading...
Need help?
General
