EasyManua.ls Logo

Directed Electronics VIPER 3203

Directed Electronics VIPER 3203
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9
© 2009 Directed Electronics. All rights reserved.
An alarm report** will replace the disarm output if the alarm was trig-
gered; the siren will chirp 4 or 5 times, and the disarm LED,
LED
and 4 or 5 fault tones play to alert of the report.
Remote Start /AUX1/AUX4
Press and release
Remote Start***
Activates (or if on, deactivates) the remote starter. The engine and
parking lights turn on or off accordingly. The rs/aux LED and on
tones play, or the rs/aux LED and off tones play to confirm.
AUX1/AUX4****
Activates (or if on, deactivates) the aux 1or aux 4 output. The aux
LED and on tones or off tones play to confirm.
AUX/Trunk
Press and hold AUX
The Trunk opens (if connected) when this button is pressed for 2 sec-
onds. The Aux LED and tones play to confirm.
* See Remote and System Operations for details.
** See Alarm Features for details.
*** Available only with optional Remote Start module installation.
**** This feature must be turned on by an authorized Directed dealer.

Related product manuals