13
©
1999 Directed Electronics, Inc.
QUICK REFERENCE GUIDE:
To arm using your remote
■ You can activate, or arm, the system by pressing of your transmitter
for one second. When the system arms, you will hear a short siren sound,
or chirp.
To disarm using your remote
■ To disarm the system, press again. You will hear two chirps. If the
siren chirps four times when disarming, this is called Tamper Alert.
To activate Panic Mode
■ Press and hold down for 1.5 seconds.
To exit Panic Mode
■ Press again.
To activate Silent Mode
™
■ Press briefly before arming or disarming, and the confirmation chirp(s)
will be eliminated for that one operation only.
Cut along dotted line and fold for a quick and easy reference to keep in your purse or wallet.
✂✂
✂✂
To Next Page