P.8 User Guide
Passive Mode:
To arm the Starter Kill, press the button on the transmitter, OR
1. In Passive mode, the Starter Kill will automatically arm 1 minute (by
default) or 3 minutes (if configured this way) after the ignition is turned
OFF or once the last door is closed (if the doors are monitored).
2. The LED on the antenna will flash quickly during the countdown
preceding the activation of the Starter Kill.
3. Once the activation countdown expires, the LED will send a series of
quick double flashes to indicate that the Starter Kill is now armed.
To disarm the Starter Kill, press the button on the transmitter.
The Starter Kill will automatically rearm itself after 1 minute (by default)
or 3 minutes (if configured this way) if no door is left opened (if the
doors are monitored) and the ignition is not turned ON.
Active Mode:
To arm the Starter Kill, press the button on the transmitter.
1. The parking lights will flash once.
2. The LED on the antenna will flash slowly.
3. If remote door locks are installed, this will also lock the doors and arm
the OEM-style alarm.
To disarm the Starter Kill, press the button on the transmitter.
1. The parking lights will flash twice.
2. The LED on the antenna will remain OFF.
3. If remote door locks are installed, this will also unlock the doors.
To Next Page
Loading...
