12
DIRECTV HD DVR RECEIVER USER GUIDE
DIRECTV UNIVERSAL REMOTE CONTROL (RC65 & EARLIER)
The DIRECTV Universal Remote works with your pre-Genie Receivers, as well
as the latest Genie DVRs and Mini Clients, as long as the newer devices are
programmed to operate in IR Mode.
If your DIRECTV System was installed professionally, your Remote is already
programmed to operate your Receiver and TV. To re-program the Remote for
a different TV or other audio-visual equipment, press MENU, select Settings &
Help, Settings, then Remote Control and follow the onscreen instructions.
POWER BUTTON & MODE SWITCH
Use the POWER (PWR) button and Mode Switch to turn a single component on
or off (a DVD player or surround sound system, etc.). Move the Mode Switch
to the position that matches the component you want to control, and use the
POWER button to turn it off or on. The Mode switch must always be in the far left
position to control your DIRECTV Receiver. If the Mode Switch is in a position that
has not been programmed, or if you press a button that is not supported by that
particular piece of equipment, an onscreen message will display to alert you.
NOTE: If you have one or more of DIRECTV’s previous model Universal Remote
Controls (Model RC65 or earlier), you can continue using it with your existing
Receivers (HR34 and earlier) and DIRECTV Clients (C31 and earlier).
YOUR REMOTE CONTROL
To Next Page
Loading...
Need help?
General
