DirecTV Universal Remote Control User Manual

25
USING THE MASTER POWER KEY
The DIRECTV universal remote control is equipped with
a unique feature that allows you to sequentially turn on or
off all of your home entertainment devices with a single
key press in the following way:
1. Point the remote control at the devices.
2. Press and hold Power for 3 seconds to activate
the Master Power feature.Thereafter, your
DIRECTV universal remote control will
sequentially turn on or off all of your home
entertainment devices.
Depending on what mode is currently selected,
the DIRECTV universal remote control will
send IR commands to the devices in this order:
For example, if TV is selected, pressing and
holding Power for 3 seconds will first turn on
(or off) the TV, then the VCR, then the auxil-
iary device, and finally the DIRECTV Receiver.
NOTE: The DIRECTV universal remote control
always defaults to the DIRECTV mode after all devices
are turned off. Therefore, the initial power-on settings
will always be DIRECTV, TV, VCR,and AUX,with the
remote control returning to the DIRECTV mode as long
as no other device key is pressed first.
Start Mode Device On/Off End Mode
DIRECTV TV,VCR,AUX DIRECTV
TV VCR,AUX, DIRECTV DIRECTV
VCR AUX, DIRECTV, TV DIRECTV
AUX DIRECTV, TV,VCR DIRECTV
DirectTV Mnl rev1 10/25/01 7:31 PM Page 25

DirecTV Universal Remote Control Specifications

General

Brand	DirecTV
Model	Universal Remote Control
Category	Remote Control
Language	English