DirecTV Universal Remote Control User Manual

28
CHANGING VOLUME LOCK
To Change Volume Lock To The AUX Mode
(continued):
2. Enter 9 - 9 - 3.
3. Press AUX once.It will blink twice.
4. Now, whenever you press Volume or Mute,
volume will be controlled by your auxilary
device.
To Change Volume Lock Back To The TV Mode:
1. On the DIRECTV universal remote control,
press TV once. Then press and hold Setup until
the TV key blinks twice, then release Setup.
2. Enter 9 - 9 - 3.
3. Press TV once.It will blink twice.
4. Now, whenever you press Volume or Mute,
volume will again be controlled by your TV.
DirectTV Mnl rev1 10/25/01 7:31 PM Page 28

DirecTV Universal Remote Control Specifications

General

Brand	DirecTV
Model	Universal Remote Control
Category	Remote Control
Language	English