14
RESTORE FACTORY DEFAULT SETTINGS
To reset all the functions of the remote control to the
factory defaults (the original, out-of-the-box settings),
follow these steps:
1. Press and hold the MUTE and SELECT keys at the
same time until the green light fl ashes twice, then re-
lease both keys.
2. Using the number keys, enter 9-8-1. (The green light
fl ashes 4 times.)
Remote Control UG-Philips.indd 14Remote Control UG-Philips.indd 14 7/26/05 11:10:52 AM7/26/05 11:10:52 AM
To Next Page
Loading...
