8
INSTALLING BATTERIES
1. On the back of the remote control, push down on the
door (as shown), slide the battery cover off, and re-
move the used batteries.
2. Obtain two (2) new AA alkaline batteries. Match their
+ and - marks to the + and - marks in the battery case,
then insert them.
3. Slide the cover back on until battery door clicks into
place.
–+
–+
Remote Control UG-Philips.indd 8Remote Control UG-Philips.indd 8 7/26/05 11:10:51 AM7/26/05 11:10:51 AM
To Next Page
Loading...
