DIRTDEVIL.CO.UK12
1. Press the handheld release button and gently pull the handheld steamer from the main body.
2. Before use, remove the water tank, ll it with water and replace it into the handheld steamer.
3. Choose an attachment.
4. Line up the edge of the attachment with the 360⁰ tool adaptor.
5. In a hinge-like manner, push the attachment onto the 360⁰ tool adaptor until it clicks securely into place.
6. Push the 360⁰ tool adaptor and the connected attachment into the handheld steamer nozzle until it clicks
into place. Make sure the locking clip is securely attached by gently pulling the 360⁰ tool adaptor. Push and
twist the rotation collar to select the most suited cleaning angle for the chosen attachment. There are four
positions on the rotation collar for easier cleaning.
7. Plug the handheld steamer into the mains. The blue light will illuminate to indicate power on. The green
light will illuminate to indicate that the handheld steamer is ready to use.
8. To produce steam, squeeze the trigger.
USING THE HANDHELD STEAMER
USING YOUR STEAM CLEANER
WARNING: Always unplug the handheld steamer before attaching/detaching the 360⁰ tool adaptor
and attachment. The handheld steamer and attachments get very hot during use. Always allow them to
cool down before handling.
IMPORTANT: Always check the attachments are clean and free from debris. Don’t use if damaged,
broken or worn.
CAUTION: Taps should be turned o when steaming around them and sinks should be empty. Don’t
steam clean ovens, oven surfaces or grills when hot. Allow to cool to room temperature rst.
WARNING: Danger of scalding
To Next Page
Loading...
