34
Using Picture-In-Picture (Hopper with Sling only)
Chapter 3
system. Each TV’s Search History is available using that receiver’s remote. You can use
Search History to re-search for programming instead of typing the information again.
Press the Search button, access the drop-down list on the menu bar and select the History
item to see a list of your recent searches. Highlight one of the listed searches and press
the Select button to repeat it. Searches done on different days will often yield new results.
USING PICTURE-IN-PICTURE (HOPPER WITH SLING ONLY)
The Picture-In-Picture (PIP) feature of your Hopper with Sling lets you watch two
programs at once on the TV connected to your Hooper with Sling. The following
instructions describe how to use the PIP feature.
1 Press the PIP button on the remote control for your Hopper with Sling to access the fea-
ture. By default, a small window showing the programming from a second available tuner
will be displayed. PIP Controls also will be displayed across the bottom of the screen on
the TV connected to your Hopper with Sling HD DVR.
2 You can use the on-screen controls to reposition or resize the PIP window, Swap the
images in the main and PIP windows, or display them side by side on your TV screen. You
can also choose to Close the PIP window (freeing the second tuner), or select X to cancel
out of the on-screen PIP Controls. If you have closed/canceled, you can display the on-
screen controls again at any time by pressing the PIP button on your Hopper remote.
Note that the POSITION and SWAP buttons on your Hopper remote perform the same
functions as the on-screen PIP Controls for these two functions.
STARTING IN ONE ROOM AND FINISHING IN ANOTHER
To start watching a program in one room and resume it in another, do the following:
1 Press the pause button on your current receiver’s remote control and leave it behind.
2 Go to another room in your home with a connected Hopper with Sling HD DVR or linked
Joey Receiver and pick up the DISH remote control for this location. (Each remote control
shoud be paired to one and only one DISH receiver in your whole-home DVR system.)
913.book Page 34 Tuesday, January 15, 2013 4:57 PM
To Next Page
Loading...
