12
Switching on and off
1 Press and hold
b
until the display responds.
Note: If the battery has been previously removed,
your mobile will first ask you to Select Keypad
Mode. If so, depending on which keypad you have
fitted, press either
a
(4Key) or
b
(12Key).
If you are asked for a PIN code
Enter a valid code for your SIM card in one of two
ways:
• If you are using the 12 keypad: Enter the code using
the numeric keys and press
a
(
OK).
• If you are using the 4 keypad: Use
g
and
f
to
highlight each digit and press
c
to select. Press
a
(
OK) when all digits have been entered.
Your mobile display
The standby screen
When your mobile is switched on but not involved
in any activity, it reverts to its standby screen (if the
screensaver is playing - press any key):
To Next Page
Loading...