34
h
Security
The change between the normal and administrator
modes is controlled by the Admin Password, a four
digit code that is independent of the PIN code associ-
ated with your SIM card.
Note: The Admin Password is 1234 as standard. You
are strongly recommended to change this code at
your earliest convenience. See ‘Changing the admin
password’.
Changing modes
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select the
Security Level option and enter the
admin password. This is done in one of two ways,
depending on the keypad fitted:
• 4 keypad: Enter the admin password using the
navigation buttons. Use them to highlight each
required digit among those displayed and press
c
to select each digit. Press
a
(
OK) to accept
the complete password.
• 12 keypad: Enter the admin password using the
keypad as usual and press
a
(
OK) to accept the
complete password.
3 The subsequent screen shows the two modes,
Normal and Administrator, as list options and the
currently active mode will be highlighted. Use
d
or
e
to highlight the required mode and press
c
.
To Next Page
Loading...