30
Vibrate
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select
Profile and then select the Vibrate option.
Three options are provided:
Vibrate Only Select this option to disable the
ringtones for incoming calls and messages, and use
the internal vibrator as your alert.
Vibrate & Tone Select this option to use both the
ringtones and the internal vibrator to alert you to
incoming calls and messages.
Tone Only Select this option to disable the internal
vibrator and use ringtones only.
Volume control
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select
Profile and then select the Volume Control
option. Two options are provided. In each case, use
d
,
e
and
c
to select the required level:
Ring Tone Sets the volume for the incoming call
and message ringtones.
Key Tone Sets the volume for the tone that is
issued whenever you press a key.
Minute reminder
When enabled, this option emits a short beep during
every outgoing call just before every minute elapses.
This provides you with a reminder of the duration of
your call.
1 From the standby screen, press
c
, locate the
Settings option and press
c
to select.
2 Select
Profile and then select the Minute
Reminder option. Choose Enable or Disable, as
appropriate.
To Next Page
Loading...