EC-BOS-6
AX
Mounting and Wiring Instructions
Revised: February 2008 Part Number: 05DI-HIBS6AX-10
About Expansion Options
About Accessory Modules
10
EC-Net
AX
IO-16 DIN-mountable, 16 points I/O module,
used to provide I/O points as noted.
Provides the following I/O points:
• 8 - Universal Inputs (UIs).
• 4 - Digital Outputs (DOs), SPST-relay type.
• 4 - Analog Outputs, 0-10Vdc type.
Up to four (maximum) IO-16 accessory modules are supported.
Wiring is covered in a sperate document, see the EC-Net
AX
IO-16
Installation and Configuration Instructions.
EC-Net
AX
IO-34 DIN-mountable, combined 34 points
I/O with 24V isolated power module,
used to provide I/O points as well as
power EC-BOS-6
AX
from a dedicated,
external, Class-2, 24Vac transformer or
a 24Vdc power supply.
Only one EC-Net
AX
IO-34 per EC-BOS-6
AX
. Provides the following
I/O points:
• 16- Universal Inputs (UIs).
• 10- Digital Outputs (DOs), SPST-relay type.
• 8- Analog Outputs, 0-10Vdc type.
Up to two additional IO-16 accessory modules can be used. Do
not power the IO-34 if using an EC-WPM-XX.
Wiring is covered in a sperate document, see the EC-Net
AX
IO-34
Installation and Configuration Instructions.
Table 2 EC-BOS-6
AX
accessory modules.
Model
ModelModel
Model Description
DescriptionDescription
Description Notes
NotesNotes
Notes
To Next Page
Loading...
