Distech Controls EC-BOS-6AX - Declaration of Conformity

Declaration of Conformity
EC-BOS-6
AX
EC-BOS-6
AX
Mounting and Wiring Instructions
Part Number: 05DI-HIBS6AX-10 Revised: February 2008
25
Declaration of Conformity
EC-BOS-6
AX
Application of Council Directive:
Application of Council Directive:Application of Council Directive:
Application of Council Directive:
89/336/EEC, 92/31/EEC, 73/23/EEC, 93/68/EEC
Manufacturer’s Name:
Manufacturer’s Name:Manufacturer’s Name:
Manufacturer’s Name:
Distech Controls, Inc.
Manufacturer’s Address:
Manufacturer’s Address:Manufacturer’s Address:
Manufacturer’s Address:
4005-B Matte Boulevard
Brossard, Quebec J4Y 2P4
Canada
Product Model Number:
Product Model Number:Product Model Number:
Product Model Number:
EC-BOS-6
AX
, with the following: EC-NPB-PWR, EC-NPM-PWR-UN, EC-NPB-LON,
EC-NPB-MDM
Type of Equipment:
Type of Equipment:Type of Equipment:
Type of Equipment:
Information Technology Equipment
EMC Standards Applied:
EMC Standards Applied:EMC Standards Applied:
EMC Standards Applied:
Standard
EN 61000-6-4
Description
Electro-Magnetic Compatibility Emissions Generic
Criteria Met
Complies
EN 61000-6-2 and
EN 61000-6-1, as
defined below
Electro-Magnetic Compatibility Immunity Complies, as
documented
below
EN50081-2 Generic Emission Standard for residential, commercial,
and light industrial environment
CISPR 11 Limits of Radio Disturbance - Radiated Emissions
Limits of Radio Disturbance - Conducted Emissions
PASS Class A
PASS Class A
IEC 61000-4-2 E.S.D PASS Criteria A
IEC 61000-4-3 Radiated Field Immunity PASS Criteria A
IEC 61000-4-4 Electrical Fast Transient Immunity (Signal Ports) Electrical
Fast Transient Immunity (AC Power)
PASS Criteria A
PASS Criteria A
IEC 61000-4-5 Surge Immunity PASS Criteria A
IEC 61000-4-6 Conducted Immunity PASS Criteria A
EN 61000-3-2 Harmonic Current PASS
EN 61000-3-3 Quasi-Stationary Harmonics Test, Voltage
Fluctuation and Flicker
PASS
IEC 61000-4-11 Voltage Dips
Voltage Interrupts
PASS Criteria A
PASS Criteria A
IEC 61010-10-1:
90 +A1:92 + A2:95
Safety requirement for electrical equipment for
measurement, control and laboratory use
PASS