74 ECL-PTU-207 Preloaded Applications
FANM
This menu is used to configure the fan control mode.
Parameter Default Valid
Choices
Description
FAN (nviFP39)
0 ON Fan is controlled between minimum speed and 100%
1 AUTO Fan control is based on terminal load
X 2 SMART
Fan control is based on terminal load when unoccupied,
and between minimum speed and 100% in other
occupancy modes.
3 AUTO HEAT Fan control is based on heaing load
4 AUTO COOL Fan control is based on cooling load
Table10: Fan Mode
Allure EC-Smart-Vue Screen-by-Screen Guide
To Next Page
Loading...
