40 1820 - TRENCHING ATTACHMENT
DRIVE
40 1820 - TRENCHING ATTACHMENT
DRIVE
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICES:
• Do not dig within 10’ (3 m) of electric cables or gas pipes.
• Keep digging boom low when operating on slopes. Drive
slowly and cautiously at all times.
6. Push digging chain control to start digging chain.
7. Push boom control (green) slowly to lower digging chain to
trench depth.
Incorrect procedures could result
in death, injury, or property damage. Learn to use
equipment correctly.
NOTICES:
• Machine will lurch when chain starts to dig. Allow 3’ (1 m)
between end of chain and obstacle.
• Digging chain on top side of boom can catch on root or rock.
Stand back from console and hold controls loosely.
Jobsite hazards
could cause death or serious injury.
Use correct equipment and work
methods. Use and maintain proper
safety equipment.
NOTICES:
• Do not dig within 10’ (3 m) of electric cables or gas pipes.
• Keep digging boom low when operating on slopes. Drive
slowly and cautiously at all times.
6. Push digging chain control to start digging chain.
7. Push boom control (green) slowly to lower digging chain to
trench depth.
Incorrect procedures could result
in death, injury, or property damage. Learn to use
equipment correctly.
NOTICES:
• Machine will lurch when chain starts to dig. Allow 3’ (1 m)
between end of chain and obstacle.
• Digging chain on top side of boom can catch on root or rock.
Stand back from console and hold controls loosely.