1820 - DRILLING ATTACHMENT 43
OPERATING TIPS
1820 - DRILLING ATTACHMENT 43
OPERATING TIPS
DRILLING ATTACHMENT
Turning shaft will kill you or
crush arm or leg. Stay away.
NOTICE: Keep everybody at least 10’ (3 m) away from drill pipe
during operation. Do not straddle trench or drill pipe while
drilling.
Jobsite hazards
could cause death or serious
injury. Use correct equipment
and work methods. Use and
maintain proper safety
equipment.
NOTICE: Set up warning barriers and keep people away from
equipment and jobsite while drilling.
Incorrect procedures could
result in death, injury, or property damage.
Learn to use equipment correctly.
Improper control function could
cause death or serious injury. If control does not
work as described in instructions, stop machine
and have it serviced.
NOTICE: Do not tape or tie down switch or lever.
DRILLING ATTACHMENT
Turning shaft will kill you or
crush arm or leg. Stay away.
NOTICE: Keep everybody at least 10’ (3 m) away from drill pipe
during operation. Do not straddle trench or drill pipe while
drilling.
Jobsite hazards
could cause death or serious
injury. Use correct equipment
and work methods. Use and
maintain proper safety
equipment.
NOTICE: Set up warning barriers and keep people away from
equipment and jobsite while drilling.
Incorrect procedures could
result in death, injury, or property damage.
Learn to use equipment correctly.
Improper control function could
cause death or serious injury. If control does not
work as described in instructions, stop machine
and have it serviced.
NOTICE: Do not tape or tie down switch or lever.
To Next Page
Loading...
