1820 - MAINTENANCE 71
BELTS
1820 - MAINTENANCE 71
BELTS
BELTS
Check belts for wear and proper
tension every 50 hours. Do not
overtighten. Keep oils, grease, and
fuel off belts.
Check belts by measuring tension
springs. With axle lock engaged,
spring A should be 3.2” (8 cm) and
spring B should be 5” (13 cm). Tighten
nuts to adjust springs.
HEADSHAFT SPROCKET BOLTS
Torque headshaft sprocket bolts to 50
ft•lb (68 N•m) every 200 hours.
om1668
om1668
BELTS
Check belts for wear and proper
tension every 50 hours. Do not
overtighten. Keep oils, grease, and
fuel off belts.
Check belts by measuring tension
springs. With axle lock engaged,
spring A should be 3.2” (8 cm) and
spring B should be 5” (13 cm). Tighten
nuts to adjust springs.
HEADSHAFT SPROCKET BOLTS
Torque headshaft sprocket bolts to 50
ft•lb (68 N•m) every 200 hours.
om1668
om1668
To Next Page
Loading...
