Ditch Witch 1820 - Drilling Attachment Control Description; Drilling Control Switch Operation

44 1820 - DRILLING ATTACHMENT
DRILLING ATTACHMENT CONTROL DESCRIPTION
44 1820 - DRILLING ATTACHMENT
DRILLING ATTACHMENT CONTROL DESCRIPTION
DRILLING ATTACHMENT CONTROL
DESCRIPTION
Drilling Control
This switch controls drill string
rotation.
• To rotate clockwise, press top.
• To rotate counterclockwise,
press bottom.
IMPORTANT: Always rotate
clockwise during drilling and
backreaming. Rotate
counterclockwise only to
dislodge a dry bore bit or
reamer that has siezed in
the bore hole.
IMPORTANT:
• This switch is spring-loaded and will automatically stop the
drilling attachment when released.
• If using only remote handle, switch will not be mounted on
dash.
c00ic084a.eps
DRILLING ATTACHMENT CONTROL
DESCRIPTION
Drilling Control
This switch controls drill string
rotation.
• To rotate clockwise, press top.
• To rotate counterclockwise,
press bottom.
IMPORTANT: Always rotate
clockwise during drilling and
backreaming. Rotate
counterclockwise only to
dislodge a dry bore bit or
reamer that has siezed in
the bore hole.
IMPORTANT:
• This switch is spring-loaded and will automatically stop the
drilling attachment when released.
• If using only remote handle, switch will not be mounted on
dash.
c00ic084a.eps