Ditch Witch 1820 - Specifications (Continued); Fluid Capacities and Battery Details; Vibration and Noise Levels

1820 - SPECIFICATIONS 85
1820 - SPECIFICATIONS 85
FLUID CAPACITIES: U.S. METRIC
Fuel tank
Gasoline 5.4 gal 20.4 L
Diesel 6.5 gal 24.6 L
Engine oil:
Honda 1.5 pt 1.4 L
Kubota 0.84 gal 3.2 L
Hydraulic reservoir 5.5 gal 20.8 L
Hydraulic system 6.25 gal 23.7 L
Headshaft reducer oil 2.5 pt 1.2 L
Axle reducer oil 2.5 pt 1.2 L
BATTERY:
Group 26R, 12-volt, top-post; SAE Reserve Capacity 60-80 min.; SAE cold crank
450 amps.
VIBRATION LEVEL
Vibration at the operator's hand during normal operation is 3.25 m/s
2
.
NOISE LEVEL
Operator 89 dBA sound pressure per ISO 6394
Exterior 100 dBA sound power per ISO 6393
Specifications are called out according to SAE recommended procedures.
Specifications are general and subject to change without notice. If exact
measurements are required, equipment should be weighed and measured. Due
to selected options, delivered equipment may not necessarily match that
described.
FLUID CAPACITIES: U.S. METRIC
Fuel tank
Gasoline 5.4 gal 20.4 L
Diesel 6.5 gal 24.6 L
Engine oil:
Honda 1.5 pt 1.4 L
Kubota 0.84 gal 3.2 L
Hydraulic reservoir 5.5 gal 20.8 L
Hydraulic system 6.25 gal 23.7 L
Headshaft reducer oil 2.5 pt 1.2 L
Axle reducer oil 2.5 pt 1.2 L
BATTERY:
Group 26R, 12-volt, top-post; SAE Reserve Capacity 60-80 min.; SAE cold crank
450 amps.
VIBRATION LEVEL
Vibration at the operator's hand during normal operation is 3.25 m/s
2
.
NOISE LEVEL
Operator 89 dBA sound pressure per ISO 6394
Exterior 100 dBA sound power per ISO 6393
Specifications are called out according to SAE recommended procedures.
Specifications are general and subject to change without notice. If exact
measurements are required, equipment should be weighed and measured. Due
to selected options, delivered equipment may not necessarily match that
described.